Label Position 4 at Holley Cox blog

Label Position 4. which should you get, a 4” x 3” or a 3” by 4”? if you are doing 2 labels on 1 package (front and back) one label would be copy position 3 and the other side would be copy position. The width, the length, and the roll direction. All are different ways to say the same thing! While a 4” x 3” label is similar to a 3” x 4” label, there’s an important distinction as far as how the labels are oriented on the roll. For example, a certain label applicator may require a rewind position. Labels come in long rolls that are fed through an applicator. the orientation or wind position of your label depends on your application method. unwind, also known as label roll direction, is the dimension or edge of the label that comes off the roll first. With the 4” x 3” label, the label’s width is 4 inches across the width of the roll and its height is 3 inches. the label printing industry has developed standard descriptions for the various label unwind directions to avoid any confusion. As the roll runs through the machine, the labels will come off the roll in a specific direction. Your roll direction in relation to your die size is important, as they need to match each other!

if you are doing 2 labels on 1 package (front and back) one label would be copy position 3 and the other side would be copy position. With the 4” x 3” label, the label’s width is 4 inches across the width of the roll and its height is 3 inches. The width, the length, and the roll direction. For example, a certain label applicator may require a rewind position. Labels come in long rolls that are fed through an applicator. All are different ways to say the same thing! the label printing industry has developed standard descriptions for the various label unwind directions to avoid any confusion. unwind, also known as label roll direction, is the dimension or edge of the label that comes off the roll first. As the roll runs through the machine, the labels will come off the roll in a specific direction. While a 4” x 3” label is similar to a 3” x 4” label, there’s an important distinction as far as how the labels are oriented on the roll.

[ANSWERED] Place each of the following labels in the proper position on

Label Position 4 Your roll direction in relation to your die size is important, as they need to match each other! if you are doing 2 labels on 1 package (front and back) one label would be copy position 3 and the other side would be copy position. unwind, also known as label roll direction, is the dimension or edge of the label that comes off the roll first. Labels come in long rolls that are fed through an applicator. For example, a certain label applicator may require a rewind position. While a 4” x 3” label is similar to a 3” x 4” label, there’s an important distinction as far as how the labels are oriented on the roll. As the roll runs through the machine, the labels will come off the roll in a specific direction. The width, the length, and the roll direction. All are different ways to say the same thing! the orientation or wind position of your label depends on your application method. Your roll direction in relation to your die size is important, as they need to match each other! With the 4” x 3” label, the label’s width is 4 inches across the width of the roll and its height is 3 inches. which should you get, a 4” x 3” or a 3” by 4”? the label printing industry has developed standard descriptions for the various label unwind directions to avoid any confusion.